Filter
Top Products
13
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Door Grill Installation Instructions
Parts Needed:
Qty
(4) Button Head Screws (already in place in stove)
Tools Required:
Qty
(1) 1/8” allen wrench
To install the Grill:
1. Remove the four button head screws from body of the
stove with a 1/8” allen wrench. See Figure 29.
2. Pull the scraper rod out, rotate the grill vertically, (with
the notch to the left) and slide the grill over the scraper
rod (slide the rod between the third and fourth bar). See
Figure 30.
3. Rotate the grill back to the horizontal position and re-install
the four button head screws through the two holes at each
end of the grill and into the stove body. See Figure 31.
Figure 30
Figure 31
Figure 32
Figure 29
Button Head Screw
Slider Rod
Between 3rd & 4th Bar
Notch
Rotate Grill Back To Horizontal Position
Re-install Button Head Screws