Filter
Top Products
16
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Log Set installation Instructions
Kit Contents (A):
Part #H5142
Qty
(1) left log (B)
(1) right log (C)
(1) front log (D)
(2) log support brackets (E)
A - Kit Contents
cut lines
B
C
D
B
C
D
E
bracket in place correctly
E
Figure 38
Figure 39
Figure 41
Figure 40
Tools Required:
None
Caution: The logs can be damaged if they are not handled
with care!
To Install the log set:
1. Remove the two log support brackets from the box and
bend the ends of the brackets 90 degrees at the cut lines.
See Figure 39.
2. One bracket goes into the left corner and the other into
the right corner of the firebox. Rotate the brackets so
they are placed as shown in Figure 40. The bracket fits
between the back of the firebox and the air wash at the
front of the stove.
3. Remove the ceramic logs from the box and carefully
unwrap them. Position each back log (Figure 41, B, C)
in their proper place, one on each side against the back
of the firebox.
4. The front log should face the front of the firebox with the
woodgrain showing. It should rest on the other two back
logs. See Figure 41 for assembled log set.