Filter
Top Products
33
Leica ASP300
Fig. 16
→
→
Adding molten paraffin
• Molten wax may have a maximum temperature of 70°C.
• If filling with molten wax, do not fill above the MAX level (see Fig. 15).
• After a wax bath has been filled, it must be marked as ‘full’ in the
REAGENT STATUS screen.
Software control
• If the wax baths are filled with molten wax, it is possible to override
the Leica ASP300 melting time calculation.
For that purpose, in supervisor mode, access the
SERVICE FUNCTIONS screen (Fig. 16).
• Press TIME UNTIL WAX MELTED.
• Enter the required delay time and press OK
to confirm.
If the instrument attempts a paraffin step with the paraffin only partly molten, severe instru-
ment malfunctions may occur.
→
→
5. Operation