Filter
Top Products
̈Unscrew the 2 hexagon-head screws.
̈Carefully pull out the base with lamp mount
and connecting cable.
̈Unscrew the top Phillips screw.
̈Pull up the cooling element and pull it
to the side.
̈Unscrew the bottom clamping system.
̈Remove the transport anchor and store
it for later transport.
̈When replacing burners, remove the
used mercury burner and dispose of it
as hazardous waste.
• When inserting the new mercury burner, the mark on the
metal mount must be upright.
̈Carefully insert the mercury burner into the bottom mount.
̈Rotate the mercury burners with seal point so that it is
located to the side of the beam path.
̈Carefully set the flexible power supply on the top metal
mount of the mercury burner.
̈Very carefully tighten the top and bottom
screws.
̈Guide the lamp mount with the mercury
burner into the rail of the lamp housing.
̈Tighten the screw.
8
Leica lamp housing and mercury burner