Filter
Top Products
4.1 Supply unit
for lamp housing 106 z
with 50W mercury
lamp
12
Leica lamp housing and mercury burner
Type 301-185.003/10372
Input:
220V/240V ±10%
220V ~ 50/60Hz
Hg 50W L1/L2
Osram No. 0-958
P. Max. 320VA
1. On/off switch
2. Operating time meter
3. Switching between L1 and L2 burners
4. Safety starter
5. Switching between 50Hz/60Hz
6. Lamp connection
7. Power cable
The supply unit is intended for power supply voltages of
over 220V. For power supply voltages under 220V, an
additional pre-transformer, such as 110V/230V, is required.
Follow the safety instructions!
̈Connect the lamp housing cable to the supply unit.
̈Switch on ‹L1› or ‹L2› according to the label on the lamp base.
̈ Switch on 50Hz or 60Hz.
̈Connect the power cable to the power supply.
̈Read the hour meter and note the number displayed.
21 67
543
4. Supply units