Filter
Top Products
The Leica Microsystems 106 z lamp housing is used.
If the 105 z lamp housing model is available, it can also be used.
Follow the safety instructions!
The following gas discharge lamps can be used. They require
different types of lamp mounts.
Order No. Typical
Life
500 137 50W high-pressure mercury burner 100 hrs.
(alternating current)
500 138 100W high-pressure mercury burner 200 hrs.
(direct current, stabilized/not stabilized)
500 321 100W high-pressure mercury burner 300 hrs.
(direct current, stabilized/not stabilized)
(Type 103 W/2)
* Please follow the burner manufacturer’s datasheets.
The mercury burner is delivered in separate packaging.
– Without identification code or with identifying code L1
for lower current/higher voltage,
– Identification code L2 higher current/lower voltage.
̈Unscrew the 2 hexagon-head screws.
̈Pull the contact plug partially out
(do not rotate).
̈Lift the cover.
2.1 Installing/changing
the mercury burner
7
Leica lamp housing and mercury burner
2. High-pressure mercury burner