Filter
Top Products
Your Seamless Switcher / Scaler
3
a source, freezing that source, or deactivating that source (and displaying a
blank screen)
• Includes a front panel lock
• Incorporates full ProcAmp
1
processing for video and audio correction
• Offers high quality de-interlacing 3:2/2:2 pull down
2
• Can provide non-linear scaling for 4:3, 16:9 transformation
3
• Supports firmware upgrade via RS-232
• Includes non-volatile memory that retains the last setting, after switching
the power off and then on again
Control the VP-719DS:
• From the front panel OSD control buttons
• Remotely, from the infra-red remote control transmitter
• Remotely, via RS-232
Achieving the best performance means:
• Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
• Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your Kramer VP-719DS
away from moisture, excessive sunlight and dust
4 Your Seamless Switcher / Scaler
Figure 1, Table 1 and Table 2 define the front and rear panels of the
VP-719DS.
1 Processing amplification enables adjustment of different video and audio signal parameters
2 Accommodates the frame-rate of a converted movie (24 frames per second) to video frequencies (25 frames per second
(PAL); 30 frames per second (NTSC)
3 See Figure 16