Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the Seamless Switcher / Scaler
14
Figure 42). The OSD status appears superimposed over the top right corner of
the screen for a few seconds
1
, as Figure 7 illustrates
2
:
Figure 7: OSD Output Status
7.2 Controlling the Seamless Switcher / Scaler
You can control the Seamless Switcher / Scaler via:
• The front panel OSD control buttons (see section 7.3)
• The infra-red remote control transmitter (see section 7.3.8)
• RS-232 remote control
7.3 Operating via the OSD MENU Screen
The OSD superimposes a menu on the screen from which you can control your
the VP-719DS, using the MENU, ENTER, -, +, UP and DOWN front panel
OSD buttons.
Pressing the MENU front panel OSD button or the MENU key on the
infra-red remote control transmitter (see Figure 42) displays the first OSD
screen, the “Menu screen” (see Figure 8), which displays six interactive
icons
3
(defined in Figure 9).
After initially pressing the MENU front panel OSD button or the MENU key
on the infra-red remote control transmitter, each subsequent press moves to
the previous level in the OSD screen (Esc.).
1 By default, 20 seconds. But you can reset the timeout (from 3 to 60 seconds), see section 7.3.6.5
2 Adjusting the output resolution results in a corresponding adjustment to the size of the OSD status window
3 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2), Level 4 (a subset of level 3) and Range