Filter
Top Products
A-61074 April 1997 3-49
Scan direction Scan direction defines whether the bar code is read in one direction;
from left to right, or in two directions; from left to right or right to left.
NOTE: When bar codes are read in two directions (bidirectional), the
time required to read/decode bar codes is extended.
The default for all modes is
Unidirectional
.
The options are:
— Unidirectional—
results in bar codes being read in only one
direction (left to right), requiring that the start character be to the
left.
—
Bidirectional
—results in bar codes being read in two directions
(from left to right or right to left).
• Select
Scan Direction
from the Bar Code Reader menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA
Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch
Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides
Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 13.6
Mode Configuration
Bar Code Reader
On/Off
Bar Code Type
Codes Per Document
Minimum Code Length
Maximum Code Height
Scan Direction
Code Quality
Confirmation Tone
Bar Code Location
Previous Menu
Scan Direction
Uni–Direction
Bi–Direction
Previous Menu
• Select the desired scan direction.
• Press
Enter.