Filter
Top Products
3-24 A-61074 April 1997
Batching defines the number of documents of a specified level to
process prior to performing a predefined action.
The batching option is
not available.
• If you select
Batching
from the Mode Configuration window, the
following message will appear:
Selection is not available.
• Press
Enter
to close the message.
• Make another selection from the Mode Configuration window.
Length monitor defines the options required to enable/disable the
document length monitor, set the minimum and maximum document
lengths acceptable, and what action is to be taken when a document
shorter than the minimum length or longer than the maximum length
is fed into the Scanner 5500/7500.
• Select
Length Monitor
from the Mode Configuration window.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA
Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch
Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides
Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 7.0
Mode Configuration
Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
The following pages provide instructions on how to define the
document length monitor options. When the length monitor
definitions are complete, you will automatically be returned to this
window.
To close the
Length Monitor
menu:
• Select
Previous Menu.
Proceed to make any additional mode
configuration definitions.
Batching
Length monitor