Filter
Top Products
A-61074 April 1997 3-27
Defines the maximum document length accepted.
The default for all modes is
13.000 inches / 330 mm.
The options are:
— Within the range of 2.500 inches / 64 mm minimum to
20.000 inches / 508 mm maximum.
• Select
Maximum Length
from the Length Monitor menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA
Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch
Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides
Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 7.3
Mode Configuration
Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
Enter Max. Doc. Length
Range: 2.500 . . . 20.000
13.000
Use Arrow Keys to Set
Increase value by 0.125 inch or 1mm
Decrease value by 0.125 inch or 1mm
Increase value by 1.250 inch or 20mm
Decrease value by 1.250 inch or 20mm
• Enter the desired maximum document length using the numeric
keys;
or
• Use the arrow keys to increase or decrease the current minimum
document length to the desired maximum document length:
— The left arrow key will decrease the value in 0.125 inch or 1 mm
increments.
— The right arrow key will increase the value in 0.125 inch or
1 mm increments.
— The down arrow key will decrease the value in 1.250 inch or
20 mm increments.
— The up arrow key will increase the value in 1.250 inch or 20 mm
increments.
• Press
Enter
.
NOTE: A maximum document length of 17.000 inches / 432 mm or
less is recommended based upon the capacity of the exit
hopper.
Maximum length