Filter
Top Products
A-61074 April 1997 3-31
Detection range defines the amount of tolerable skew.
The default for all modes is
10–30 degrees.
The options are:
—
5–30 degrees
—results in an error being reported if the amount of
document skew is between 5 and 30 degrees.
—
10–30 degrees—
results in an error being reported if the amount
of document skew is between 10 and 30 degrees.
• Select
Detection Range
from the Skew Monitor menu.
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA
Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch
Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides
Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 8.2
Mode Configuration
Skew Monitor
On/Off
Detection Range
Error Response
Previous Menu
Detection Range
5 – 30 Degrees
10 – 30 Degrees
Previous Menu
• Select the desired skew detection range.
• Press
Enter.
Detection range