Filter
Top Products
A-61074 April 1997 1-3
Using the Mode Setup
Software
5. Select
Continue
.
6. Press
Enter.
The following screen appears:
Setting
English
Inch
1990/10/10
00:00
Soft
Enabled
Period (.)
Configuration Items
Display Language
Measurement System
Date Format
Time Format
Set Time and Date
Confirmation Tone Volume
Confirmation Tones
Fixed Field Delimiter
Printer Messages
Version Numbers
Load scanner from laptop
Load laptop from scanner
Mode Configuration
End Session
READY
DIGITAL SCIENCE Status
This section provides guidelines and conventions which will assist
you in using the Mode Setup Software.
There are two levels of definitions:
• Machine definitions—which apply to all modes.
• Mode definitions—
which apply to one mode.
Each option to be defined requires you to select a displayed option
or enter a value.
If asked to select an option:
— Use the arrow keys to position the highlight cursor over the
desired option.
— Press
Enter
.
If asked to enter a value:
— Typically, the highlight cursor will appear over the input field; if it
does not, use the arrow keys to position the highlight cursor over
the input field.
— Enter (type) the desired value, using the keyboard or numeric
keypad.
— Press
Enter
.
• Most windows contain an option entitled
Previous Menu
. This
option returns you to the previous menu after completing a
definition. If you are not returned to the previous menu, or you want
to return without altering the default or previously defined value,
select the
Previous Menu
option.