Filter
Top Products
I1_1 Select the position that will place the sill
supports near the outermost point on sill (FIG. 11).
Attach the sill supports to the cabinet track hole
closest to the selected position using TYPE A
screw (_.
Screw(Type A)(_)
_1_ Place the sillsupportswith the cabinet on the
window sill'sselected position.
lill The cabinet should be installed with a very
slight tilt (about 1/2") downward toward the outside
(FIG. 12).
Adjust the bolts and the nuts of sill supports to level
the cabinet.
Sorow
. (Type C) (_
lltrU
_'f FIG. 14
B Attach the window locking bracket _) with
TYPE C screw _). (FIG. 15)
FIG. 15
ir_ Slide the chassis into the cabinet. (FIG. 16)
CAUTION: For security purpose, reinstall screws at
cabinet's sides.
SiltSupport_) FIG. 12
_1 Attach the cabinet to the window stool by
driving the TYPE B screws (_)through the front
angle into window stool.
Track
FrontAngle
Screw(Type B) (_)
Sill Support (_) FIG. 13
B Pull the window sash down behind the upper
guide. Pulleach side curtain fully to each sash
track.
i]_'l Attach each side curtain to the window sash
using TYPE C screws (_. (FIG. 14)
Power
Screw
Screw
FIG. 16
_-_Cut the foam seal _) to the proper length and
insert between the upper window sash and the
lower window sash. (FIG. 17)
FIG. 17
i}_] The vent control handle must be straightened
before the decorative front is attached.
Pull down part _;) to align with part ®.
Part
FIG. 18
-7-