Filter
Top Products
HOW TO INSTALL
a Remove the screws which fasten the cabinet at
both sides and at the back.
_"t Screw the upper guide (_ to the top of the
cabinet as shown in FIG. 7 using (3) TYPE A
screws _. Insert the side curtain (_ into the upper
guide (_ and lower guide of the air conditioner.
Fasten the curtains to the unit with (8) TYPE A
screws _).
FIG. 3
B Slide the unit out of the cabinet by gripping the
base pan handle and pull forward while bracing the
cabinet.
FIG. 4
B Cut the FOAM-PE _) to fit the underside of the
window sash. Peel off the backing and attach the
seal as shown in Fig. 5.
FIG. 5
L_'lJRemove the backing from the FOAM-PE _) and
attach to the bottomof the upper guide (_.
FIG. 6
,(TYPEA) FIG. 7
r_open the window. Mark a line on center of the
window stool (or desired air conditioner location).
Carefully place the cabinet on the window stool and
align the center mark on the angle front with the
center line marked in the window stool.
Windowstod
FIG. 8
U Pull the bottom window sash down behind the
upper guide until it meets.
NOTE: Do not pull the window sash down so tightly
that the movement of side curtain is restricted.
WINDOW SASH UPPER GUIDE _)
SIDE CURTAIN(_
FIG. 9
B Looselyassemble the sillsupportsusing the
parts in FIG. 10.
INDOOR_ /-f,..,.---_--_== OUTDOOR
_"= _ ,911S_pp0=*rt(_
Bolt(_) FIG. 10
-6-