Filter
Top Products
SECTION VIi.CARE OF YOUR MACHINE
NOTE:
*Unplug the machine_
*Do not dismantle the machine other than as explained
in this section°
* Do not store the machine in a high-humidity area, near
a heat radiator or in direct sunlight.
*Clean the outside of the machine with a soft cloth and
mild soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could be HOT, protect your fingers when
you handle it.
Unplug the machine and open the face covert While
pushing the bufb up, turn it to the left (counterclockwise) to
remove.. Put in a new bulb by pushing it up and turning it to
the right (clockwise)..
i =
¢
U,
t N
t i
Cleaning the Feed Dogs
Unplug the machine, and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver..
Use a lint brush to clean the feed dogs.
NOTE: I
Lint brush is not furnished with model 15202, but may be
ordered (page 4)
\
J
Replace the needle plate and tighten it with a screwdriver..
J
58