Filter
Top Products
TO REMOVE CLOG FROM HOSE
Io Rotate the extension hose release lever
counter-clockwise to release extension
hose.
Extension
Wand
Wand
Extension Hose
Nozzle
Hose
2. Remove the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting, and pulling
straight upo
3, Plug in the vacuum cleaner and turn it
on.
4_ Stretch the extension hose to maximum
length and then allow the hose to return
to its natural length.
I
i
i
I
Hose
Storage
Position
/ Hose
SoRe-insertthe hoseintothe original
storage positionfrom which it was
removed_Pressfirmly to assure
connection°
6_ Rotate hose release lever clockwise to
the locked position.
_WARNING
Personal Injury Hazard
DO NOT place hands or Feet under-
neath the vacuum cleaner at any
time.
If the dust bog, filter areas and the hose
areas are free of clogs, disconnect the
nozzle hose from the wand holder and
check the nozzle for clogging,,
Clean the agitator according to the
instructions in the AGITATOR CLEANING
section.
Return the vacuum cleaner to the upright
position before plugging into an electrical
outlet°
2O