Kenmore 1T6.31100 Vacuum Cleaner User Manual


 
1
DUST BAG REPLACEMENT J
/
TO REPLACE DUST BAG
_WARNING ]
Always unplug power cord from electrical!
outlet before performing maintenance to thai
vacuum cleaner. 1
TO REMOVE DUST BAG
1. Pull on the Dust Beg
dust bag cover
latch located
on the side of
the dust bag
cover,,
NOTE: This unit has a bag safety stop
which prevents cover from closing if bag
is missing or not properly installed, Do
not pull on the bag safety stop when
removing/installing the dust bag.
2_ Grasp the
dust bag collar
Bag and pull
Safety Stop gently,
carefully
removing the
dust bag from
the dust bag
Dust Bag holder,
the used dust Dust Bag
bogDo.o, Nreuse dust bag,
Dust Bag :i'_
and the motor Moto
safety filter for Safety jl_._J./_l
i i ,,,1 i j i1o., t-
CAUTION
NEVER REUSE A DUST BAG_ Very fine
materlals_ such as carpel freshener,
face powder_ fine dust, plaster, soot_
etc. can clog the bag and cause it to
burst before it is full. Change bag
more often when vacuuming these
materials.
Note: See PARTS AND FEATURES for
Bag number°
2. Push dust bag
collar opening
completely over
the dust bag holder
as far as it will go.
3. Tuck the bag into
the dust bag
chamber° Be sure
the bottom and
sides of the dust
bag are completely
within bag cavity
rlor to closing the
ag cover.,
4, Close the bag
cover. You will
hear a distinct snap
when cover is
securely closed°
Check to see that
the dust bag is fully
placed in the bag
chamber,
NOTE: If bag is not installed or not
installed properly the bag safety stop
prevents the cover from closing°
17