Filter
Top Products
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal Injury
from cleaner suddenly starting.
Disconnect the power cord from the elec-
trical outlet.
Press the handle release pedal to let the
upper portion of the cleaner lay back
against the floor.
Remove
Two Locking Tabs the base
Latches plate as
outlined In
the BELT
CHANG-
ING AND
BRUSH
CLEANING
section°
CAUTION
Do not use a bulb rated over 15W.
During extended use, heat from
the bulb could overheat surround-
ing plastic parts,
Grasp the
bulb socket
assembly
and while
gently rock-
ing it from
side to side,
pull it up out
of the noz-
zle housing.
Bulb Socket Assembly
Remove the light
ToReleaso bulb by pushing
_E
the bulb in while
_) __, turning counter-
clockwise to
release from the
slot.Then pull the
light bulb straight
out.
To replace the light
bulb carefully insert ,_
and turn clockwise !I
to securely fit into
slot.
NOTE: See PARTS
AND FEATURES
for bulb #.
E CAUTION
Do not plug in or turn on until the
vacuum is completely raassem-
bled.
i i ,
Replace the base plate as outlined in the
BELT CHANGING AND BRUSH
CLEANING section.
Latches
Two Locking Tabs
20