Filter
Top Products
Unfold the new dust
bag,
Insert the dust bag
completely onto the _/
dirt tube by holding ---1
the bag collar.
Snap the dust bag
collar into position.
Be sure the bottom of dust bag is com-
pletely within the bag cavity prior to
replacing the bag cover.
Position the Bag
bag cover so Cover 1
its position- Body
I
ing tab fits Positioning
into the body Slot
positioning
tab slot. Bag Cover
Close the Positioning Tab
bag cover,
You will hear a
snap when the
cover is securely
closed,
WARNING
not operate without exhaust
r,
Check filter
frequently.
Clean when dirty,
Press the handle
release pedal to
let the upper por-
tion of the clean-
er lay back
against the floor,
Panel
Handle --
Release Pedal
Grasp the air
exhaust panel
with a hand on
each side,
press inward
and pull the
panel forward.
Lift the foam filter to remove. Wash the
foam filter, rinse and dry,
DO NOT
clean in the
dishwasher. "_
Foam _.
DO NOT Filter
install while _
damp.
Replace the
dry foam filter,
carefully posi-
tioning it so
the slits fit
around the
four raised
pins°
Replace the _
exhaust panel,
Return the cleaner
to the upright posi-
tion.
15