Filter
Top Products
TO REMOVE BAG:
WARNING
Press the
release button
located on the
top of the bag
cover°
Release
Button
Bag
Cover
Grasp the dust
bag collar and
pull gently, care-
fully removing the
dust bag_
Throw
away the
used dust
bag.
Do not
reuse.
Pull the bag
cover forward.
Remove and
lay aside.
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause It to burst before it is
full, Change bag more often when
vacuuming these materials.
Bag Holder
Check the dust
tube and the
motor safety
filter.
If either is
blocked, check
the TROUBLE-
SHOOTING
chart°
TO REPLACE BAG'
Fold the safety
seal tab on the
new dust bag
away from the
opening that
fits on the dust
tube.
Dust Bag
Seal Tab
NOTE: See PARTS AND FEATURES for
Bag #,
Unfold the new dust bag.
jl
Insert the dust bag
onto the dust tube
completely by
holding the bag
collar, Snap the
dust bag collar
into position.
Be sure bottom of dust bag is completely
within bag cavity prior to replacing the
bag cover.
Ba ---L'_.
Position g 1
the bag Cover
cover so Body
its posi- Positioning
tioning tab slot
fits into Bag Cover
the body PositioningTab
positioning
tab slot,
Bag --T'_F_
Close the bag
cover,
You will hear a
distinct snap
when cover is
securely closed.
13