Filter
Top Products
ATTACHMENT ASSEMBLY ]
HOSE AND WAND
1. insert the tab on
the telescopic wand
into the "J"slot on
the hose handle.
Twist the telescopic
wand 1o lock in
place.
2_ Place the telescop-
ic wand in the wand
holder and route the
hose as shown.
4. Rotate the f
hose release _
lever down
and route the
hose as Hose
shown, cuff_-._
Hose"-'_'F_
5_Snap the Teles_ap;cJ_
hose into the Wand---_l_-
hose cuff on Wand I Jt
the side of Holder---J IJ
the vacuum ._'_
cleaner Hose
Laver_-"_'k_
3. Snap the
hose handle
Into the hose
holder located
on the handle
of the vacuum
cleaner.
NOTE: Be sure
the raised
edge of the
hose handle
rests against
edge of the
hose holder,
. i
Do not operate the agitator without the|
wand properly inserted into the wand|
holder and the hose handle properly|
secured in the hose holder J
6. Rotate the hose
release lever
upwards to lock
the hose in place.
PET HANDI MATE TM
For operation of Pet Handi Mate TM see
separate Use & Care Guide.
1. Place Pet
Handi Mate TM Pet
into the storage Mate'"
area_
2_ Rotate the Pet
Handi Mate r_
back until it
snaps into place_
CREVICE TOOL
1. insert the
crevice toof into
the holder on the
side of the vacu-
um cleaner as
shown,
COMBINATION BRUSH
1_Insert the
combination Combln_tlon
brush into Brush
the holder
on theback
of the
Vacuum
cleaner as
shown.,