Filter
Top Products
PILE HEIGHT SELECTION AND SETTING
To select a pile height setting:
Select a pile height setting by pressing
the HEIGHT ADJUST pedal on the side of
the nozzle_ The pile height setting shows
on the indicator window_ See SUGGESTED
PILE HEIGHT SETTINGS.
Attention: Refer to your carpet
manufacturers cleaning
recommendations. Some more delicate
carpets may require that they be
vacuumed with the agitator turned off to
prevent carpet damage°
EIGHT
ADJUST
Pedal
color
Window
SUGGESTED PILE HEIGHT SETTINGS
There are four (4) pile height settings on
the vacuum cleanen l:or best deep down
cleaning, use the XLO setting, However,
you may need to rals_ the helght to make
some jobs easier, such as scatter rugs and
some deep pile carpets, and to prevent
the vacuum cleaner from shutting off.
Suggested settings are:
HI - Shag, deep pite, or scatter rugs_
MED - Medium to deep pile.
LO - Low to medium pile_
XLO - Most carpets, bare floors, and
delicate carpets that require agitator to
be turned off.
CHECK BAG INDICATOR
When the vacuum cleaner _srunning with
normal air flow, the light on the CHECK
BAG indicator Is off. The light comes on
whenever the airflow becomes blocked_ If
that occurs, check the d_sposable dust bag,
motor safety filter and other possible ctog
locations shown in CLOG REMOVAL.
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain
attachments, due to reduced airflow
through attachment=, No maintenance is
required°