Filter
Top Products
DUST BAG REPLACEMENT
..................
|Always unplug power cord from e|ectr|.
Jcal outlet before performing mainte-
nance to the vacuum cleaner.
TO REMOVE DUST BAG
I. Pult on the
dust bag
cover latch
located on
the side of
the dust bag
cover°
OustBag _- _[/t
Cove_Latch _b...
NOTE: Do not pull on the bag safety stop
when removing/installlng the dust bag.
Dust Bag
c2oGrasp the
ust bag collar
and pull
gently_
carefully
removing the
dust bag from
the dust bag
holden
3oThrow away the used dust bag_
Do not reuse dust bag_
Dus! Bag
Holder
Dus! Bag
Chamber
4o Check the
dust bag
holder and
the motor
safety filter
for dirt or
clogs,
CAUTION
NEVER REUSE A DUST BAG. Very fine
materials, such as carpet freshenera
face powder, fine dust, plaster, soot,
etc. can clog the bag and cause it to
burst before if is full. Change bag more
often when vacuuming these materia|s_
TO REPLACE DUST BAG
!_ Unfold the
new dust bag_ Dust
Fold the safety Bag
new dust bag "-- _ea,.Sa'e'lVab
away from the
opening that /// "', _
fits on the bag
supports,
Note: See PARTS AND FEATURES for
Bag number.
2. Push dust bag
collar opening
completely over
the dust bag holder
as far as it will go_
3, Tuck the bag into
the dust bag
chamber. Be sure
the bottom and
sides of the dust
bag are completely
within bag cavity
rior to closing the
ag cover.
4. Close the bag
coven You will
hear a distinct snap
when cover is
securely closed,
Check to see that the dust bag is fully
placed in the bag chamber.
NOTE: if bag is not installed or not
Installed properly the bag safety stop
prevents the door from closing.
17