Filter
Top Products
POWERMATE CARE
Always follow all safety precautions when performing maintenance to the PowerMate,
,CAUTION
Moving Parts! To
reduce the risk of
personal injury, DO
NOT touch the
agitator when the
vacuum cleaner is
ON. Contacting the
agitator while it is
rotating can cut,
bruise, or cause other injuries.
Always turn off and unplug vacuum
cleaner from electrical outlet before
servicing.
Use caution when operating this product
near small children.
I wARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or
personal injury from vacuum cleaner
suddenly.starting. .........
L_t%]
TO REMOVE BELT
1. Remove floor
brush from the
PowerMate.
Brush
Releas_ejf
Pedal
2. Turn
PowerMate ._
upside down and _ "-,
unscrew five (5)
PowerMate cover _
screws_
3. Turn PowerMate right side Upr
4. TO remove
cover, grasp the
side latches and
pull out,
5. Unscrew two (2)
agitator cover screws
and remove agitator
cove r.
6. Lift agitator
assembly out
and remove
worn belt,
7. Check and clean end cap area& See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
19