Kenmore 111.784 Carpet Cleaner User Manual


 
_Position upholstery tool (P) over projection (Q)
with brush facing the back of the upper handle
and snap into place.
FmLLTHE SOLUTmON TANK
UnpJug carpet cleaner from electrical outlet.
_Remove solution tank (A) by pressing on solu-
tion tank release latch (B) and lifting upward.
_Turn tank upside down and unscrew cap (C).
_Using the detergent cup (D) located behind
the solution tank, measure the proper amount
of detergent and pour detergent into tank. For car-
pet cleaning, measure two cupfuls (approx. 5 ft.
oz.). For upholstery cleaning, measure one cup z
ful (approx. 2zl/2 ft. oz.).
Fill tank with hot tap water. Replace cap, making
sure it is screwed on tJghtmy. Return detergent cup,
flat side with lettering facing out, to cavity behind
solution tank. Replace tank on carpet cleaner by
positioning bottom first. Press on top of tank to
secure latch in place.
CAUTION: Detergents contain Anionic and
NonBonic Su_actants. Avoid contact with
the eyes and skin. In case of contact with
eyes, flush with coBd water for 15 minutes. In case
of contact with skin, wash with water, if irritation
persists, call a physician. For Medical Information
(U.S.), call 1-800-752-7869.
D
12