Filter
Top Products
11
English
• Press the ¢ button once to skip to the beginning of the
next track.
• Press the
4 button to skip to the beginning of the track be-
ing played. Press twice quickly to skip to the beginning of
the previous track.
Search Play
Holding down the 4 or ¢ button on the Unit or the Remote Con-
trol, during playback, will fast forward/backwards the CD so you can
quickly find a particular passage in the track you are listening to.
You can program the playing order of the tracks using the Remote
Control.
■ You can program up to 20 tracks in any desired order.
■ You can only make a program when the CD Player is stopped.
■
1. Insert a CD.
■
2. Press the CD
38
button.
■
3. Press the
e
button to stop the CD.
■
4. Press the PROGRAM button.
The System enters the programming mode and the “PRGM” in-
dicator lights up.
■
5. Press the UP, DOWN, >, or < button to
select the track to program.
UP button: Increases the track number by 1.
DOWN button: Decreases the track number by 1.
> button: Increases the the track number by ten.
< button: Decreases the track number by ten.
• Example: for track 2, press the UP button twice. For track
12, press the > button, then press the UP button twice (or
simply press the UP button 12 times).
■
6. Press the SET button.
■
7. Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed tracks on
the display.
■
8. Press the CD
38
button.
The System plays the tracks in the order you have programmed
them.
■ You can skip to a particular program track by pressing the 4
or
¢ button during Program Play.
To cancel the programming before playing,
press the CAN-
CEL button in above step 4, 5 or 6.
To confirm the programmed tracks,
press the PROGRAM
button; the tracks making up the program will successively be dis-
played in the programmed order.
To stop playing,
press the e button once.
To delete all the tracks in a program,
press the
7
button (or
the CANCEL button on the Remote Control)ýwhile the CD Player
is stopped. The “PRGM” indicator goes out and the program is de-
leted. Normal Play is resumed.
The program will also be deleted when you press the
0 button to
open the CD holder.
Note: If the total playback time of the programmed tracks exceeds
99 minutes 59 seconds, the total playback time will go out
on the display.
The tracks will play in no special order when you use this mode.
Press the RANDOM button on the Remote
Control.
Playback automatically starts and the “RADM” indicator lights up
on the display.
To skip a track during playback, press the
¢ button to jump
to the next track in the random sequence. Press the
4 button to
jump back to the start of a track being played.
To cancel random play, press the RANDOM button again. The
“RADM” indicator goes out and Normal Play is resumed.
You can set the program or individual track playing to repeat as
many times as you like.
Press the REPEAT button on the Remote
Control.
The Repeat indicator changes with each press of the button, as
shown below.
= ALL =blank display = (back to the beginning)
: Repeats one track.
In Random Play mode, this indicator is skipped
ALL : In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in the
program.
In Random Play mode, repeats all the tracks in ran-
dom order.
To exit Repeat mode, press the REPEAT button until the Repeat
indicator on the display goes out
Programming the
Playing Order of the Tracks
PROGRAM
DOWN
SET
UP
Total playback time of the programmed tracks
Random Play
Repeating Tracks
Programme order number
Track number
Ux5000-e.fm Page 11 Wednesday, April 8, 1998 10:51 AM