Filter
Top Products
8
English
■■
Using the Tuner
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM (MW/LW) stations. Stations can be
tuned in manually, automatically, or from preset memory storage.
■
Before listening to the radio:
• Check that both the FM and AM (MW/LW) antennas are
correctly connected. (See page 3).
One Touch Radio —————————
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
■
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
■
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM (MW/LW).
■
2. Select a station using one of the following
methods.
■
Manual Tuning
Press the
4 or ¢ button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
OR
■
Auto Tuning
If you press and hold the
4 or ¢ button on the Unit or the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
OR
■
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Press the UP or DOWN button on the Remote Control to select
the desired preset number. After 1 second the display will show
the preset number’s band and frequency.
Example:Press the UP button until the preset number 12 “P--
12” appears.
■
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET TUNING button to select the desired preset
number. Its band and frequency are displayed.
You can preset up to 30 FM stations and up to 15 AM (MW/LW)
stations using the Remote Control.
Note:
Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting —————————
■
1. Select a band by pressing the TUNER
BAND button.
■
2. Press the 4 or ¢ button to tune in a sta-
tion.
■
3. Press the SET button.
“P------” is displayed. The lower 2 digits blink.
Tuning In a Station
TUNER
BAND
AM FM
Presetting Stations
DOWN
UP
or
(After 1 second)
TUNER
BAND
DOWN
SET
UP
SET
or
FM = 30, AM = 15
When changing the
Band
VOLUME
CD
TUNER
BAND
MD
/TAPE
DOWN
SET
UP
TREBLE CANCELBASS
RANDOM REPEATPROGRAM
AUTO
PRESET
CD
AHB.
SUPER PRO
FM MODE AUXDISPLAY
SLEEPDIMMER
REMOTE CONTROL RM-RXU5000
<
FM MODE
TUNER BAND
¢
4
AUTO PRESET
UP
>
DOWN
SET
PRESET
TUNING
AHB.
SUPER PRO
AUX
MD/TAPE
TIMER/SNOOZE
TUNER
BAND
OPEN/CLOSE
SLEEP
CLOCKUPMULTI CONTROLDOWN
U
L
T
R
A
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
5
0
0
0
CD
TUNER BAND
4
¢
PRESET
TUNING
Band display, Frequency display,
Preset channel
RDS indicators FM mode indicators
Ux5000-e.fm Page 8 Wednesday, April 8, 1998 10:51 AM