Filter
Top Products
6
English
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the play button for
that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no CD
in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
■■
Common Operations
COMPU PLAY
On the Unit
CD 38 button
TUNER BAND button
MD/TAPE button
AUX button
On the Remote Control
CD 38 button
TUNER BAND button
MD/TAPE button
AUX button
PRESET
TUNING
AHB.
SUPER PRO
AUX
MD/TAPE
TIMER/SNOOZE
TUNER
BAND
OPEN/CLOSE
SLEEP
CLOCKUPMULTI CONTROLDOWN
U
L
T
R
A
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
5
0
0
0
CD
PHONES
VOLUME
STANDBY
ULTRA MICRO COMPONENT SYSTEM
UX-5000
STANDBY
indicator
VOLUME
CD
TUNER
BAND
MD
/TAPE
DOWN
SET
UP
TREBLE CANCELBASS
RANDOM REPEATPROGRAM
AUTO
PRESET
CD
AHB.
SUPER PRO
FM MODE AUXDISPLAY
SLEEPDIMMER
REMOTE CONTROL RM-RXU5000
PHONES
VOLUME
DIMMER
DISPLAY
AHB SUPER
PRO
BASS
TREBLE
VOLUME+,–
AHB
SUPER PRO
CLOCK
Volume
illumination
Turning the System On ——————
Press the button.
The display comes on and the STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in when
the power was last turned off.
■
For example, if the last thing you were doing was listening to a
CD, you are now ready to listen to a CD again. If you wish, you
can change to another source.
■
If you were listening to the Tuner last, the Tuner comes on playing
the station it was last set to.
Turning the System Off ——————
Press the button again.
The STANDBY indicator lights up and the display is blank, except for
the clock display.
■
Some power (5W) is always consumed even though power is
turned off (called Standby Mode).
■
To switch off the System completely, unplug the AC power cord
from the AC outlet. When you unplug the AC power cord, the
clock will be reset to 0:00 after about 20 minutes, and preset Tuner
stations will be erased after about 24 hours.
You can adjust the brightness of the display.
To make the display brighter,
press the DIMMER button on the
Remote Control.
To make the display darker,
press the DIMMER button on the
Remote Control again.
• The brightness of the volume illumination is also adjusted.
■
In Standby mode, the normal brightness is the same as the darker
brightness for the powered System. When you press the DIMMER
button in Standby mode, the brightness becomes further darker.
In standby mode, the volume illumination does not light.
Turning the Power On and Off
STANDBY
STANDBY
Adjusting the Brightness
(DIMMER)
Ux5000-e.fm Page 6 Wednesday, April 8, 1998 10:51 AM