Filter
Top Products
7
v Press the start/stop button again. When the bobbin is
fully wound it will stop automatically.
Press the start/stop button to stop the machine
then return the bobbin winder spindle to the left.
Remove the bobbin and cut the thread with the
bobbin thread cutter.
e Bobbin thread cutter
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
For safety purposes, the motor will stop automatically
after running for two minutes.
1
2
3
4
q
w
e
Winding the bobbin
z Guide the thread around the bobbin winder thread
guide while holding the thread with both hands.
q Bobbin winder thread guide
x Thread through the hole in the bobbin from the
inside to the outside. Put the bobbin on the bobbin
winder spindle.
w Bobbin winder spindle
c Push the spindle to the right. Press the start/stop
button while holding the end of the thread. Stop
the machine after the bobbin is wound a few layers.
Cut the thread close to the hole in the bobbin.
CAUTION
Use the Janome plastic bobbin for horizontal
hook machines (marked with J). Using other
bobbins, such as prewound paper bobbins,
may cause stitching problems or damage the
bobbin case.