Filter
Top Products
4
q
w
e
r
t
GETTING READY TO SEW
Connecting the power supply
Turn off the power switch and insert the machine plug
into the machine socket.
Insert the power supply plug into the wall outlet and turn
the power switch on.
qPower switch
wMachine plug
eMachine socket
rPower supply plug
tWall outlet
NOTE:
After turning on the power, it takes approximately ten
seconds for boot-up.
For Your Safety
While in operation, always keep your eyes on the sewing
area, and do not touch any moving parts such as the
thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug the power
supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Polarized plug (for U.S.A and Canada only)
The symbol “O” of a switch indicates the “off” position of
a switch.
For appliances with a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If
it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.