Filter
Top Products
10
Goulds Pumps
PHV - Packaged Hydrovar Series
CHARACTERISTICS OF THE ELECTRIC PUMPS USED IN PHV SERIES
BOOSTER PACKAGE
1, 2, 3 AND 4 SSV VERTICAL MULTI-STAGE PUMPS
• Multistage centrifugal vertical electric pumps. All metal
parts in contact with pumped liquid are made of
304/316 stainless steel.
• A version: round anges, in-line discharge and suction
ports, AISI 304
• B version: ANSI anges, in-line discharge and suction
ports, AISI 316
• Reduced axial thrusts enable the use of standard
motors that are easily found on the market.
• Standard Baldor, NEMA motors
• Easy maintenance. No special tools required for assembly
or disassembly.
• ANSI/NSF 61 certified by CSA for potable
drinking water.
SV33 AND 46 MULTI-STAGE PUMPS
• Vertical multistage centrifugal pump with impellers,
diffusers and outer sleeve made entirely of stainless steel,
and with pump casing and upper head made of cast
iron in the standard version.
• High hydraulic efciency for signicant energy savings.
• Innovative axial load compensation system on pumps
with higher head. This ensures reduced axial thrusts and
enables the use of standard motors that are easily found
on the market.
• Standard NEMA Baldor
®
motors.
• Mechanical seal can easily be replaced without
disassembling the motor from the pump.
• Mechanical sturdiness and easy maintenance. No special
tools required for assembly or disassembly.
• ANSI/NSF 61 certified by CSA for potable
drinking water.
REFERENCE STANDARDS
• cUL Listed as pumping packaged unit, 42UC
• VFD (Hydrovar) UL recognized
• Baldor motor UL recognized
• Pumps meet ANSI/NSF 61 certification by CSA for potable drinking water
• Pumps meet ANSI/UL778 standards
• Control/disconnect meet UL508A standards