Hunter Fan 90122A Fan User Manual


 
12 41973-01 03/08/2006
ENGLISH
®
HUNTER FAN COMPANY
2500 FRISCO AVENUE
MEMPHIS, TN 38114, USA
Printed in China
Storage
troubleShootIng
PROBLEM
Fan will not work.
SOLUTION
Make sure the interlock switch
is properly installed as directed
in the assembly instructions. (see
page 9)
PROBLEM
Fan will not oscillate.
SOLUTION
Push down on knob on top of mo
-
tor housing to activate oscillation.
(see page 10)
PROBLEM
Can not adjust the
angle of the fan.
SOLUTION
Loosen the screw on the side of
the fan neck. Adjust to the desired
angle and tighten the screw. (see
page 10)
If you have tried these trouble-
shooting solutions and still have
trouble, visit our Web site at
http://www.hunterfan.com.
1. To store the fan, disassemble
the Front and Back Grilles,
remove the Blade Assembly,
and clean the entire fan with a
damp cloth.
2. ALWAYS store the fan in a dry
place.
3. NEVER store the fan while it is
still plugged in.
4. NEVER wrap the cord tightly
around the fan.
5. DO NOT put any stress on the
cord where it enters the fan, as
it could cause the cord to break.