5
42798-01 • 09/16/09 • Hunter Fan Company
5
2.2
2.4
2.1
2.3
2 • Installing the Ceiling Mounting Plate
71
2
2
Your ceiling mounting plate (2) comes with four pre-installed noise
isolators (71). Check to make sure all four isolators are in place and were
not removed during shipment.
read the lead wires from the outlet box down through the hole in the
middle of the ceiling mounting plate (2).
CAUTION: To avoid possible electrical shock, before installing your fan,
disconnect the power by turning o the circuit breakers to the outlet box
and associated wall switch location. If you cannot lock the circuit breakers
in the o position, securely fasten a prominent warning device, such as a
tag, to the service panel.
Drill two 9/64” pilot holes into the wood support structure through the
outermost holes in the outlet box.
