A SERVICE OF

logo

18
42798-01 • 09/16/09 • Hunter Fan Company
18
9.10
9.9
9.11
148
150
149
Place the cover plate (148) up against the glass bowl (150). Align the holes
in the cover plate (148) with the grommet hole of the metal disc..
Screw the nial (149) onto the threaded nial rod end until tight.
Removing the Light Fixture
Disconnect the plug connectors between the black wire and the black
wire with a white stripe. Disconnect the plug connectors between the two
white wires.
9 • Completing Your Installation With or Without a Bowl Light Fixture (cont.)
9.8
150
Lift the glass bowl (150) up so the threaded nial rod ts through the hole
in the glass bottom.