14
42798-01 • 09/16/09 • Hunter Fan Company
14
7 • Assembling the Blades
Align the tabs on the trim ring opposite the grooves in the hanger ball.
Using both hands, push the ceiling mounting plate cover trim ring (4) up
to the top of the ceiling mounting plate cover. e ceiling mounting plate
cover trim ring will snap and lock into place.
Attach each blade (46) to a blade arm (98) using three blade assembly
screws (67). e blades may appear slightly loose after screws are
tightened. is is normal.
Squeeze the rubber blade grommets (66) into the holes in the blades (46).
Should you need to remove the trim ring, press rmly on opposite sides of
the trim ring (4) directly above the groove in the hanger ball. e tabs will
ex out releasing the ceiling mounting plate cover trim ring (4).
3
3
4
4
66
67
98
46
46
6.66.5
7.1 7.2
6 • Installing the Ceiling Plate Cover(continued)
