13
42798-01 • 09/16/09 • Hunter Fan Company
13
6 • Installing the Ceiling Plate Cover
Groove
Tab
Swing the fan up to align the ceiling mounting plate cover screw holes
with the mounting holes on the ceiling mounting plate(2).
Rotate the pipe/ball assembly (7) so the tab in the ceiling mounting plate
cover (3) is secure in the hanger ball groove. Note: Your fan may have
multiple tabs and grooves that must be aligned.
Holding the ceiling mounting plate cover (3) up with the screw holes
aligned, partially install two ceiling mounting plate cover screws (62) into
the holes opposite the ceiling mounting plate tabs.
Partially install a ceiling mounting plate cover screw (62) between the slots
in the ceiling mounting plate cover (3). When all the holes are properly
aligned, securely tighten all three ceiling mounting plate cover screws.
Verify that the tabs in the ceiling mounting plate cover are still in the
grooves of the hanger ball.
7
62
2
3
3
3
3
6.2
6.1
6.3
6.4
