Hunter Fan 42747-01 Manual

next previous

42747-01•09/21/07•HunterFanCompany

5 • Installing the Canopy and Canopy Trim Ring

5-1.Holdingthecanopy,raisethefanothehook.

5-2.Aligntheslotsinthecanopywiththetabsontheceilingplate.

5-3.Raisethecanopyovertheceilingplate.Rotatethecanopy

clockwise until the tabs on the ceiling plate totally engage with

the slots in the canopy.

5-4. Partially install the three canopy screws into the canopy one at a

time. Once all three screws are in, tighten them.

5-5. Usingbothhands,pushthecanopytrimringuptothetopofthe

canopy. e canopy trim ring will snap and lock into place.

Should you need to remove the canopy

trim ring, follow these steps:

1. Locate the tab indicators, small

bumps on top of tabs.

2. Press ﬁrmly on opposite sides of the

ring toward the canopy. e tabs will

ﬂex out releasing the trim ring from

the canopy.

Step 5-2

Canopy Trim

Ring

Canopy

Ceiling Plate

Step 5-3

Canopy

Screw

Steps 5-4 – 5-5