Hunter Fan 42747-01 Manual

next previous

42747-01•09/21/07•HunterFanCompany

1 • Getting Ready

To install a ceiling fan, be sure you can do the following:

•Locatetheceilingjoistorothersuitablesupportinceiling.

•Drillholesforandinstallwoodscrews.

•Identifyandconnectelectricalwires.

•Lift40pounds.

Ifyouneedhelpinstallingthefan,yourHunterfandealercandirect

you to a licensed installer or electrician.

Gathering the Tools

You will need the following tools for installing the fan:

•Electricdrillwith9/64”bit

•Standardscrewdriver

•Phillips-headscrewdriver

•Wrenchorpliers

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts. Check

for any shipping damage to the motor or fan blades. If one of the fan

blades was damaged in shipment, return all the blades for replacement.

Ifanypartsaremissingordamaged,contactyourHunterdealerorcall

HunterPartsDepartmentat888-830-1326.

Preparing the Fan Site

Before you begin installing the fan, follow all the instructions in

the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan

location and attachment to the building structure are essential for

safety, reliable operation, maximum eﬃciency, and energy savings.

Installing Multiple Fans?

If you are installing more than

one fan, keep the fan blades in

sets, as they were shipped.