Hunter Fan 42747-01 Manual

next previous

42747-01•09/21/07•HunterFanCompany

Plug

Connector

Detail

7 • Installing the Switch Housing

7-1. Toattachtheupperswitchhousing,partiallyinstalltwo#6-32x

3/8” housing assembly screws into the switch housing mounting

plate.

7-2. Alignthekeyholeslotsinthehousingwiththehousingassembly

screws.

7-3. Turn the housing counterclockwise until the housing assembly

screws are ﬁrmly situated in the narrow end of the keyhole slots.

Installtheremaining#6-32x3/8”screwintothehousing.Tighten

all three screws ﬁrmly.

CAUTION: Make sure the upper switch housing is securely attached

to the switch housing mounting plate. Failure to properly attach and

tighten all three assembly screws could result in the switch housing

ﬁxture falling.

7-4. To attach the lower switch housing, connect the upper plug

connector from the motor to the lower plug connector in the

lower switch housing assembly.

Note: Both plug connectors are polarized and will only ﬁt together

one way. Make sure the connectors are properly aligned before

connecting them. Incorrect connection could cause improper

operation and damage to the product.

7-5. Place the lower switch housing assembly over the upper switch

housing.Alignthesidescrewholesintheupperandlowerswitch

housings.Attachthelowerswitchhousingtotheupperswitch

housingwiththree#6-32x3/8”housingassemblyscrews.

Steps 7-1 – 7-3

Housing

Assembly

Screw

Upper

Switch

Housing

Housing

AssemblyScrew

Lower Switch

Housing

Step 7-4