Hunter Fan 42700 Manual

next previous

42700-01•01/15/08•HunterFanCompany

5 • Assembling and Hanging the Fan

Steps 5-4 – 5-5

Low Proﬁle Screw

Low Proﬁle Washer

Steps 5-1 – 5-2

Downrod

Canopy

Youcanassembleyourfanforstandardmounting(steps5-1–5-2)

orforlowprolemounting(steps5-3–5-5).Note: For low proﬁle

mounting,thedownrodisreplacedwiththelowprolewasher.

5-1.Toassemblefantohangdownfromaatorangledceiling,insert

the downrod through the canopy. Feed the wires from the fan

through the downrod.

5-2.Loosenthesquareheadsetscrewontheadaptertoinstallthe

pipeandballassembly.Note:Whenthepipeandballassembly

isfullyinstalled,2-3threadsonthepipewillstillbevisible;thisis

normal. Securely retighten the set screw with a wrench or pliers.

SkiptoStep5-6.

CAUTION:eadapterhasaspecialcoatingonthethreads.Do

notremovethiscoating;thecoatingpreventsthedownrodfrom

unscrewing.Onceassembled,donotremovethedownrod.

5-3. Removethesetscrewfromtheadapter.

5-4.Placethelowprolewasher(lipdown)intothecanopy.Besure

the green ground wire is pointing up toward the ceiling.

5-5.Aligntheholesinthewasherwiththeholesintheadapter.

Assemblesecurelywiththreelowprolescrews.

Note:Beforehangingthefan,alignandengagethetwotabsfromthe

bottomofthecanopyandthetwogroovesinthehangerball.

5-6.Raisethefanandplacethehookontheceilingplatethroughthe

round hole in the rim.

WARNING:Fanmayfallifnotassembledasdirectedinthese

installation instructions.

Step 5-6

Round

Hole