Hunter Fan 42700 Manual

next previous

42700-01•01/15/08•HunterFanCompany

9 • Completing Your Installation

9-1. Partially install two light kit ﬁtter screws into the light kit

mounting plate.

9-2.readtheplugconnectorfromthefanthroughthelightkittter.

9-3.Alignthekeyholesinthelightkittterwiththetwopartially

installed screws and rotate to engage the screws in the narrow

ends of the keyholes.

9-4.Installtheremainingscrewtosecurethelightkitttertothelight

kit mounting plate. Securely tighten all three screws.

9-5.Connectthe2-pinplugconnectorfromthefantothe2-pinplug

connectorfromtheballast.

9-6.Attachtheballasttothelightkittterwithtwoballastscrews.

9-7.Installtheincluded22Wattuorescentbulbintothehookson

the ﬁtter.

9-8.Connectthe4pinplugfromtheballasttotheuorescentbulb.

9-9.Placetheglassglobeintotheglobetrimband.Alignthethree

holesinthetrimbandwiththethreeholesinthetter.Installand

securely tighten all three screws.

Steps 9-1 – 9-8

Step 9-9

Light Kit

Fitter

Ballast

Fluorescent

Bulb

Glass

Globe

Globe

Trim

Band