Hunter Fan 42700 Manual

next previous

42700-01•01/15/08•HunterFanCompany

7-6. Usingthelargewireconnectors,connectthefanandreceiverto

the power wires as follows:

•Connectthewhitewire(A/CIN)fromthereceivertothewhite

wire from the ceiling.

•Connecttheblackwirefromthereceivertotheblackwirefrom

the ceiling.

CAUTION:Besurenobarewireorwirestrandsarevisibleafter

making connections.

7-7. Runthethinwhiteantennawirefromthereceiverthroughone

oftheslotsintheceilingplate.(Forbestreception,makesurethe

end of the antenna is exposed at the top of the canopy.)

7-8. Connectthegreengroundwiresfromtheceilingplateandthe

downrod to the ground wire from the ceiling.

7-9.

Pushallwiresandwireconnectorsbackthroughtheceilingplate

holeintotheoutletbox.Placethegreenandwhitewiresona

separatesideoftheoutletboxfromtheotherwires.