Filter
Top Products
How to use
Power Nozzle
Handle adjustment
The handle has two positions
when used with the power noz-
zle: Upright and Operating.
To lower handle to the Operating
position, place your foot on the
power nozzle and push the han-
dle down.
Automatic nozzle
adjustment
The power nozzle adjusts auto-
matically to effectively clean hard
surface floors and all carpet from
low pile to shag.
However, the nozzle is not rec-
ommended for very irregular
floor surfaces such as brick,
slate and certain parquet floors.
To clean these floors, use the
Wall/Floor Brush.
It is suggested that you use the
power nozzle with the Suction
Regulator closed for full suction.
If the power nozzle is difficult to
push, open the Suction Regula-
tor.
Edge cleaning
Brushed edge cleaning is provid-
ed on the right side of the nozzle
to remove imbedded dirt in car-
pet near baseboards and furni-
ture. Guide the right side of the
nozzle parallel to the edge of the
carpet or furniture for brushed
edge cleaning.
Standard edge cleaning is pro-
vided on the left side of the noz-
zle to remove surface dust and lit-
ter. Guide the left side of the noz-
zle parallel to the edge of the car-
pet for standard edge cleaning.
P
9
CLOSED
f
7