Filter
Top Products
3
STEP 1 Attach rack and handle
Carton contents
Remove all parts from carton and
identify each item shown. Make sure
all parts are located before disposing
of packing materials.
A. Handle section
B. Cleaner body
C. Hose rack
D. Hose, cleaning tools and wands
E. Handle bolts and nuts packet
(in bag with owner’s manual)
A
A
B
C
B
C
E
D
If you need any assistance:
Visit our website at www.hoover.com. Click on the “Service” button
to find the service outlet nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only) OR
Call 1-330-499-9499 to speak with a representative in our Consumer
Response Center.
Please do not return this product to the store.
Continued
➜
1. Cleaner assemblyNot
Open tool cover on handle section
(A).
1-2
Attach hose rack to handle section
by fitting hooks (B) on rack over
slots (C) on handle section.
Align hole on rack with circular tab
on handle.
1-4
1-3
1-1
Note: The white switch lock above the ON/OFF switch aids
in the assembly of your cleaner. Assembly can be continued
if the switch lock is missing. However, do not remove the
switch lock until assembly is completed.