Filter
Top Products
To achieve a high lustre finish
1. Attach felt buffing pads over scrubbing-waxing-polishing brushes
using fasteners, Polish to a soft shine by guiding the polisher in straight
lines or with the grain of wood. If more shine is desired proceed to Step
2.
2. Remove felt buffing pads and attach high lustre polishing pads
(available at additional cost). Once again, guide the handle in straight
lines or with the grain of the wood to achieve a high lustre finish.
To keep floors bright and shiny
The floor should be buffed frequently to restore sheen and remove
scratches and marks. This lengthens the time between waxings. Before
buffing, use a vacuum cleaner to remove dust and dirt and a damp cloth
to remove sticky particles. Stubborn spots, such as black heel marks,
can be removed by rubbing gently with very fine steel wool dampened
with wax.
If traffic areas need to be rewaxed and polished, and a solvent-base wax
has been used on the floor, apply wax only to these areas then buff the
entire floor.
Maintenance
The following section is concerned with proper maintenance of your
polisher. Familiarize yourself with these home maintenance tasks and
keep this owner’s manual in a convenient place where you can refer to it
when needed. Proper use and care will ensure continued cleaning effec-
tiveness.
Splash guard
Wipe splash guard with dry cleaning fluid or liquid soap to remove wax
and dirt after each use.
9