Filter
Top Products
Polisher base
Remove brushes and dry bottom of polisher with a paper towel or cloth
before storing.
Brushes
The brushes need to be washed in warm water and synthetic detergent
to remove wax. Rinse well. Shake to remove excess water. To dry, place
on paper towels with brushes turned toward towels. Let brushes dry
before reattaching. Wash cleaning-waxing pads the same way as
brushes; rinse, and shake to remove excess water.
Felt and high lustre
polishing pads
(Available at additional cost)
The pads should be washed
occasionally to remove wax. If
polisher does not glide easily
when buffing floors, it may be
due to an accumulation of wax
on the pads. Pads should be
washed in the same way as
brushes. Shake the high lustre
polishing pads several times
while drying to restore fluffiness.
Let pads dry thoroughly before
using. Felt pads will be damaged
if used while damp and neither
felt nor high lustre polishing pads
will polish well if they are not dry.
Storage
Wrap cord around cord storage
hooks located near bottom and
top of handle.
Store your polisher in a cleaning
closet or convenient place, ready
for use. Hang it on the wall or
remove brushes and store it with
the handle in the upright posi-
tion. Never store it on the
brushes.
10