Filter
Top Products
If you have a problem
This appliance was inspected thoroughly and was in good operating
condition when it was shipped from the factory. If
a
minor problem occurs it
usually can be solved quite easily when the cause is found. Therefore, this
check list is provided for your convenience.
Problem
Polisher
won’t run
Possible cause
Possi bie solution
1. Not firmly plugged in.
1. Plug unit in firmly.
2. No voltage in wail plug. 2. Check fuse or breaker.
3. Blown fuse/tripped
3. Replace fuse/reset
breaker.
breaker.
Polisher
1. Brushes and pads not
1. Attach brushes and
does not
properly attached.
pads properly.
gide
2. Accumulation of wax
2. Wash and dry pads
easily
on felt pads.
thoroughly.
Lubrication
The motor is equipped with two sleeve bearings. These bearings contain
sufficient lubrication for the life of the motor. The addition of lubricant could
cause damage.
Therefore, do not add lubricant to either motor bearing.
11