Filter
Top Products
There are two kinds of solvent-
base wax: paste wax and liquid
polishing wax.
Paste wax
To spread wax evenly, attach
scrubbing-waxing-polishing
brushes to polisher and snap on
cleaning-waxing pads. (Available
at additional cost.)
Spread a thin coat of wax on pads
or spread a small amount on floor
with spatula. Start by pressing
handle release lever and lowering
handle. Apply wax to floor, by
guiding in straight lines or with
grain of the wood, until wax is
spread evenly.
Cleaning, polishing wax
This type of wax is used to clean
as well as wax floors. Apply wax
according to instructions on the
container. Use the polisher only
to polish floors when this type
of wax is used. Refer to section
“Cleaning floors -Solvent clean-
ing wax method”.
Polishing and
buffing floors
Floors waxed with solvent-base
wax may be polished and buffed
with the polisher.
1.
Be sure wax is thoroughly dry
before polishing. This usually
takes 20-30 minutes but may take
longer in damp weather.
2. Use
scrubbing-waxing-
polishing brushes to polish floor.
Press handle release and start by
lowering handle. Guide the
polisher in straight lines or with
the grain of the wood.
3. A double coat of wax will give
floors more protection. Let wax
dry thoroughly and polish after
each application.