Filter
Top Products
Check
Nozzle
Hose
(cont.)
throw-away bag being full of fluff from a new carpet, put a new
throw-away bag on the cleaner. Then place handle in storage
position, turn cleaner on, and move lever on Suction Control Dial
back and forth. This will clear the hose.
2.
Check
Secondary
Filter
The secondary filter protects the
motor from dirt. Before installing a
new bag,
check the filter. Dirt
spilled in the bag housing will
accumulate on the filter and may
restrict motor performance. To clean
filter, remove wire holder and lift
out filter. Tap against a hard sur-
face, or rinse thoroughly with warm
water and dry.
Replace in bag
housing and secure with holder.
3.
Check
Bag
(See
Below.) 4.
Check
Belt
(Page 11.)
5.
Check
Agitator
Brushes (Page 12.)
THE THROW-AWAY BAG
To assure that your Hoover cleaner operates at
peak performance it is imperative that you use
only genuine Hoover Throw-Away Filter Bags
made by The Hoover Company. Genuine
Hoover bags can be identified by the
Hoover Medallion. These bags are made
from a special material which is
scien-
@
OOJf
P
tifically formulated to filter out dust
while allowing air to flow through freely.
The use of other than genuine Hoover bags
voids your guarantee !
WHEN
TO
REPLACE
THE
BAG
Check the bag from time to time. When bag is
approximately three-fourths full of dirt, it should
be changed. If you let more dirt than this accum-
ulate, your cleaner will not operate efficiently.
Be sure that throw-away bag is not extending
outside of cover and that cover is in proper
position on the gasket before latching.
9
i